Geemarc In-Line Amplifier CLA30/40 - Manuel (Page 10)

TROUBLE SHOOTING
10
IF THE AMPLIFIER DOES NOT WORK
- Make sure all connections are correctly plugged into the sockets (phone line
cord, amplifier connections).
- Make sure battery is correctly inserted with the good polarity and is fully
charged.
However, if you still have some problems when using your amplifier follow
instructions below:
- Disconnect the amplifier from the telephone.
- Connect the handset to the telephone.
- If the problem ceases, the amplifier is faulty.
- If you still have the problem when you disconnect the amplifier, the problem
comes from your telephone or your telephone line socket.
In this case you will have to inform your telephone company about the problem
or take your telephone to a repair centre.
IMPORTANT: The CLA-30/40 can not be used with telephones which include
a keypad on the handset. The CLA-30/40 can only be used with standard
phones without any amplification or tone adjustment.
For product support and help
visit our website at www.geemarc.com
telephone 01707 384438
or fax 01707 372529