Grandstream Networks 29578 - Manuel (Page 14)

1
Wall Mounting
1. Plug the AC power adaptor into the electrical outlet and
the DC connector into the jack on the back of the base.
2. Plug one end of the straight
telephone line cord into the
jack on the bottom of the
base.
3. Close the kick-stands on
the bottom of the base
unit if you’ve opened them
before.
4. Feed the line cord through
the groove and plug the
end into the modular
telephone jack. Excess
telephone line can be stuffed into the recess area on the
bottom of the Base Unit.
5. Slip the mounting holes (on the bottom of the base) over
the wall plate posts and firmly slide the unit down into
place.
6. Make sure the DESK/ WALL MOUNT tab is rotated to the
WALL position.