Installation refrigerator instructions, Before you begin, Important – GE Bottom-Freezer Refrigerators MBC12 Manuel d'utilisation

Page 8: Model mbc12

Advertising
background image

LEVELING LEGS

Adjustable legs at the front corners of the refrigerator

should be set so the refrigerator is firmly positioned on

the floor, and the front is raised just enough that the door

closes easily when opened about halfway.
To adjust the leveling legs, turn the legs clockwise to

raise the refrigerator, counterclockwise to lower it.

If you have questions, call 1.800.561.3344

or

visit our Website at:

geappliances.ca

.

To raise the refrigerator

Installation

Refrigerator

Instructions

Model MBC12

BEFORE YOU BEGIN

Read these instructions completely and carefully.

IMPORTANT –

Save these instructions for

local inspector’s use.

IMPORTANT –

Observe all governing codes

and ordinances.

Note to Installer –

Be sure to leave these

instructions with the Consumer.

Note to Consumer –

Keep these instructions for

future reference.

• Skill level – Installation of this appliance requires basic

mechanical skills.

• Completion time – Refrigerator Installation

15 minutes

Reversing the Door Swing

1 hour

• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not covered

under the Warranty.

REFRIGERATOR LOCATION

• Do not install the refrigerator where the temperature will

go below 55°F (13°C) because it will not run often enough

to maintain proper temperatures.

• Install it on a floor strong enough to support it

fully loaded.

• Do not install it closer than 5” (13 cm) next to a range.

CLEARANCES

For optimal performance of your refrigerator, the following

clearances are recommended:
• Sides

3

/

8

” (0.9 cm)

• Top 1” (2.5 cm)
• Back 2” (5 cm)

8

INSTALLING THE HANDLES

Remove the plug buttons from the left side of the doors.

Install the handles using the screws provided, and snap

screw covers in place.

Advertising