Warnings, Using the appliance, Wash program phases and power outages – Fagor America FAS 3612 User Manual

Page 19

Advertising
background image

19

7

When the program is running, the program
phase and the time remaining for it to end will
appear on the display.

The active phases will appear successively at
the top of the display as the program
progresses. The time remaining until the end
of the program will also appear on the display.
Please Note: the display will update itself at
regular intervals, but not minute by minute.

Any option button can be selected provided
the wash phase in which it takes effect has
not been passed and when the programme
allows for the option.

Pressing the delay button during washing will
have no effect on the washer-dryer.

Pressing the start/pause button during the
wash activates the PAUSE function.

WASH PROGRAM PHASES
AND POWER OUTAGES

using the appliance

If there is a power outage, the washing machine
will continue to run from where it left off after
power is restored. The same will happen if the
ON/OFF button is pressed.

POWER OUTAGES

PROGRAM

PHASES

If the program is changed on the
selector dial during the washing and
drying process, the washer-dryer will
switch itself to PAUSE status and the
original program will be cancelled.

If you need to add or remove a
garment during a program, press the
start/pause button and wait for the
door to unlock itself that the
temperature inside is not high. Press
the start/pause button again to restart
the wash from the same cycle phase
it had stopped at.

Important

warnings

Level the washing machine by adjusting the

feet to reduce the noise level produced during
the spin cycle.

Try and wash clothes of different sizes in

the same wash program to even out the
distribution of the clothes inside the drum
during spin-drying.

This model is equipped with a safety system

for spin-drying that prevents spin-drying from
being carried out if the distribution of the
clothes inside the drum is too concentrated.
This prevents the appliance from vibrating too
much.
If you find that the clothes are still excessively
wet after the spin cycle, try re-starting the spin
cycle after distributing the clothes more evenly
in the drum.

Advertising