Disassembling, Cleaning, Re-assembling – Fujioh BUF-02A Manuel d'utilisation

Page 7

Advertising
background image

7

disassembling

Filter
First, loosen the knob holding the filter, then slide it in the direction of the arrow to
disengage from the catches.

NOTE: As the filter may be grease built-up, be careful when removing it.

Filter

Knob

cleaning

1

Filter
After immersing the filter in water with a mild
detergent for 30 to 40 minutes, wash it with
a toothbrush or the like to remove dirt.
Clean the filter frequently to avoid grease
contamination and grease build-up, which
is difficult to clean.

2

Front Cover
After wiping the front cover off with a cloth
immersed in a mild detergent, wipe off
moisture thoroughly with a dry cloth.

NOTE: The stainless type of the front cover

is clear coated to avoid greasy dirt.
Be careful not to scour strongly
when cleaning as it may be
scratched or discolored.

re-assembling

Re-assembly will be done by following the opposite way of disassembly procedure
described in Item “disassembling”.

(1) Make sure that the filter is fixed in the appropriate position firmly.
(2) Make sure that there is no abnormal vibration sound when running.

Advertising
Ce manuel est liée aux produits suivants: