Installation instructions – Fisher & Paykel CE365D Manuel d'utilisation

Page 13

Advertising
background image

11

Installation instructions

Before you install the cooktop, make sure that

the countertop is square and level, and no structural members interfere with space requirements

the countertop is made of a heat-resistant material

the cooktop will not be installed directly above a dishwasher, fridge, freezer, washing machine or
clothes dryer, as the humidity may damage the cooktop electronics

if an oven is installed below the cooktop, it must be one of the models indicated in Fig.1

the installation will comply with all clearance requirements and applicable standards and
regulations

you check that the cooktop is not damaged after unpacking it. If you suspect that it is damaged,
do not install the cooktop. Contact the dealer you purchased the cooktop from

you read these instructions fully and carefully before beginning to install the appliance

you do not remove any permanently affixed labels, warnings or plates from the appliance. Doing
so may void the warranty

you switch the power off at the service panel and lock the panel to prevent the power from
being switched on accidentally

the junction box will be easily accessible with the cooktop installed

you consult local building authorities and by-laws if in doubt regarding installation

you use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for the wall surfaces
surrounding the cooktop.

When you have installed the cooktop, make sure that

the connection through conduit is not accessible through cupboard doors or drawers

the power supply cables of other appliances installed nearby cannot come into contact with the
cooktop

there is adequate flow of fresh air from outside the cabinetry to the base of the cooktop

there is adequate slack in the conduit to allow for servicing

the junction box remains accessible with the cooktop installed

you complete the ‘Final checklist’ at the end of these installation instructions.

US
CA

Advertising