Filter tip, Filling the water tank, Humidifier assembly – Hamilton Beach 840117800 Manuel d'utilisation

Page 5

Advertising
background image

5

1. Remove the filler cap on the bottom

of the tank
by turning it
counter-
clockwise
until the
UNLOCK
arrows line
up with the
ridges on
the tank.

2. Fill the tank with COOL tap water.

DO NOT
USE HOT
WATER.
Be sure to
keep the
tank free of
debris.

NOTE: Using distilled or deionized
water will prolong the life of the filter.

Never place oils, scents, or perfumes
in the water tank.

3. Replace the filler cap and turn

clockwise
until the
LOCK
arrows line
up with the
ridges on
the tank
opening.
Return the
tank to
an upright

position. When carrying the tank, use
the carry handle and support the
tank from the other side.

NOTE: Always make sure the filler
cap is locked and the gasket is in
place before inverting water tank.

Filling the Water Tank

1. Insert the water tray into the humidifier

base. Be
sure that it
is securely
seated in
the indent
in the base.

2. Place the filter on the water tray

as shown.

Humidifier Assembly

Filter Tip!

To prolong the life of the filter, it is
recommended that you turn over the
filter each time you fill the water tank.
Replace the filter when it displays mildew
or becomes stiff and non-absorbent.

840117800 Ev00 8/27/03 11:14 AM Page 5

Advertising