Operation of piano switches and keys, Sound switches, Recorder section (nc-500 only) – KORG Digital Piano Concert NC-300 Manuel d'utilisation
Page 58: Keyboard, Nc-500 only)
58
Operation of Piano Switches and Keys
SOUND Switches
The following table shows the action or setting that results when you hold down the button
indicated along the left (TOUCH, REVERB, CHORUS, METRONOME, or TRANSPOSE/
FUNCTION) and press one of the SOUND buttons indicated along the top.
PIANO 1
Normal
Deeper
Deeper
2 beats
Local
On/Off
HARPSI/VIBE
Mute Part
Volume Down
Metronome Vol.
Down
TOUCH
REVERB
CHORUS
METRONOME
TRANSPOSE/
FUNCTION
PIANO 2
Heavy
Deepest
Deepest
3 beats
Program
Change
On/Off
E.PIANO 1
Light
Light
Light
4 beats
Control
Change
On/Off
E.PIANO 2
6 beats
ORGAN 1
Werckmeister
Accent
Normal Sound
ORGAN 2
Kirnberger
Accent
Bell Sound
STRINGS/CHOIR
Mute Part
Volume Up
Metronome Vol.
Up
Data Dump
(NC-500 only)
Recorder Section
(NC-500 only)
The table below shows the action or setting that results when you hold down the TRANSPOSE/
FUNCTION button and press the indicated Recorder button.
PART 1
Erase
Part 1
TRANSPOSE/
FUNCTION
PAUSE
START/STOP
Remaining
memory
REC
PART 2
Erase
Part 2
PART 1
TOUCH
PART 2
Raises the volume of
the corresponding part.
Keyboard
The graphic below shows the setting that results when you hold down one of the indicated
buttons (PIANO SONG, METRONOME, or TRANSPOSE/FUNCTION) and press one of the
active keys on the keyboard.
C2 = Ch 01
D 3 = Ch 16
F#6 to B6 (–6 to –1 semitones)
C7 (
±
0)
C#7 to F7 (+1 to +5 semitones)
C5 = 0
C 5 = 1
D5 = 2
D 5 = 3 E5 = 4
F5 = 5
F 5 = 6 G5 = 7 G 5 = 8 A5 = 9
Enter tempo value (Numerical entry)
C4
[60]*
MIDI Channel
Pitch Fine-tune
(Both at same time: Reset)
B5 = 0.5-Hz down (–)
C6 = 0.5-Hz up (+)
Transpose
C3
[48]*
C2
[36]*
C5
[72]*
C6
[84]*
C7
[96]*
Piano Song Select
C1
[24]*
A0 (Song 1) to E3 (Song 32)
TRANSPOSE/FUNCTION Button
PIANO SONG Button
METRONOME Button
*Values in brackets are MIDI Note Numbers.
C8
[108]*