Adjusting the sound characteristics, Quickly attenuating the sound – Sony CDX-F7000 Manuel d'utilisation

Page 20

Advertising
background image

20

Changing the operative direction

The operative direction of controls is factory-set
as shown below.

If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.

Press

(SOUND)

for 2 seconds while

pushing the VOL control.

Tip
You can also change the operative direction of these
controls with the unit (page 21)
.

Adjusting the sound
characteristics

You can adjust the bass, treble, balance, fader,
and subwoofer volume.

1

Press

(SOUND)

repeatedly to select

the desired item.

Each time you press (SOUND), the item
changes as follows:

BASS (bass)

t

TREBLE (treble)

t

BALANCE (left-right)

t

FADER (front-rear)

t

SUB (subwoofer volume)

2

Adjust the level of a selected item by
pressing

<

or

,

.

After 3 seconds, the display returns to the
normal play mode.

Note
Adjust within 3 seconds after selecting the item.

Tips
When adjusting with the unit, press

(SOUND)

repeatedly and then rotate the volume control dial.

When adjusting with the rotary commander, press

(SOUND)

repeatedly and then rotate the VOL

control.

Quickly attenuating the
sound

(With the rotary commander or the card
remote commander)

Press

(ATT)

.

“ATT-on” appears in the display momentarily.

To restore the previous volume level, press
(ATT) again.

Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).

To increase

To decrease

Advertising
Ce manuel est liée aux produits suivants: