JVC LVT2190-006A - Manuel (Page 8)

8
iPod
Connecting an iPod device
Press 0 to open the disc/iPod door, then connect an iPod.
• Take the iPod protect case off before connecting.
• Connect the iPod firmly.
• To close the disc/iPod door, press
0.
– Do not close the disc/iPod door with the iPod dock
leaning toward you.
• See page 3 for more about connecting an iPod.
Playback operations
• To play back/pause an iPod: Press iPod
6.
• To select a track: Press ¢ or 4.
• To fast-forward a track: Press and hold
¢.
• To fast-reverse a track: Press and hold 4.
• To put iPod in sleep mode: Press and hold iPod 6.
• Sound distortion may occur when playing back audio
sources with high recording levels. If distortion occurs,
it is recommended to turn off the equalizer of iPod. For
information on operating the iPod, see the instruction
manual for iPod.
Menu operations
To display the menu/to go back to the previous menu
To select an item on the menu
• Depending on the type of the iPod, you can operate the
menu only on the screen of the iPod.
• Operate iPod touch itself in the following cases:
– When operating the home button.
– When selecting application icons on the home screen.
– When dragging the slider.
Disc/USB/SD
Placing a disc
Press 0 to open the disc/iPod door, then put a disc into
the holder.
• When placing a disc, be sure to place a disc with the
label side facing forward.
• To close the disc/iPod door, press 0.
• When placing or removing a disc, take enough care not
to fall the System down.
Connecting a USB mass storage class
device
• See page 2 for more about connecting a USB mass
storage class device.
Inserting an SD card
• When removing the SD card, push it in and then pull it
out.
• See page 3 for more about inserting an SD card.
Playback operations
English
EN_NX-PB10[J].indb 8 EN_NX-PB10[J].indb 8 10.12.8 11:08:53 AM 10.12.8 11:08:53 AM