GE GCG1580 SS - Manuel (Page 8)

• Use two #8-18 x 1/2
″ (45.7 cm x 1.3 cm) mounting
screws to fasten the retaining brackets at the top
of the compactor to the underside of the countertop.
• If the brackets cannot be attached to the underside
of the countertop, attach mounting clips to the
bracket. Fasten the compactor to the cabinet front
with mounting screws through the mounting clips.
8
Installation
POSITION COMPACTOR UNDER
THE COUNTERTOP 5
WARNING!
When moving the compactor, use gloves to
protect and cushion your hands.
To protect the finished flooring, use a dolly
to move the compactor near the installation
location.
Failure to follow these instructions could
result in injury.
• Plug the power cord into a properly grounded
receptacle.
• Carefully lift the front of the compactor slightly and
roll the unit into the cabinet opening until the
retaining brackets stop.
Lift here
ATTACH THE COMPACTOR TO
THE COUNTERTOP 6
Mounting
screws
Retaining
bracket
Mounting
screw
Retaining
bracket
Mounting
clip