FRIGIDAIRE WASHER PN 134604400A (0512) Manuel d'utilisation

Washer operating instructions, Before operating your washer

Advertising
background image

PN 134604400A (0512)

WASHER OPERATING INSTRUCTIONS

• Any water remaining in the dispenser at the end of

the cycle is a result of siphoning action and part of
the normal operation.

6. Select the appropriate cycle and settings for the load.

• Turn the Cycle Selector knob in either direction to

select the cycle. The estimated cycle time will be
displayed.

• Suitable wash and rinse water temperatures, final

spin speed, options and soil level for each cycle will
automatically be displayed. See the Cycle Selection
Chart for more details.

• To change the settings, press the Temperature, Spin

Speed and Soil Level buttons.

• To select or delete an option, press Options, then,

while the indicator is blinking, press Select. The
indicator will light when the option has been
selected. It will no longer be lighted when the option
has been deleted.

• To provide the best care for your laundry, not every

setting or option is available with every cycle. if a
setting or option is not available, its indicator will
not light.

• Adjustments to the cycle will be remembered each

time that cycle is selected in the future. To return to
the factory settings, press Start/Pause and Select
at the same time and hold until a signal sounds.

7. Select Delay Start to delay the beginning of the cycle

for up to 14 hours, if desired.

8. Start the washer.

• Close the door and press Start/Pause. The washer

will not operate with the door open. The status lights
will blink, the signal will beep and “dr” will be
displayed as a reminder to close the door.

Before Operating Your Washer

Read your washer Owner’s Guide. It has important safety
and warranty information. It also has many suggestions
for best washing results.

l339

Advertising