25, 30, 40, and 50 pint models – Whirlpool BHDH2500FS0 Manuel d'utilisation

Page 6

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

Using Your Dehumidifier

Continued

25, 30, 40, and 50 pint

models

Control panel
These units have a control panel containing two

controls - the Pan Full Light and the Humidistat.
Pan Full Light - This light glows when the water
pan is full and needs to be emptied.
Humidistat - This controls the amount of

moisture left in the room. When the humidity in

the room increases, the unit automatically starts.

When the humidity decreases to the selected
level, the unit automatically stops. The unit will
run constantly when control is set to DRYEST.

Unit operation
1. Turn Humidistat to OFF. Plug power supply

cord into electrical outlet. Be sure to use the
correct grounding technique. (See page 4.)

2. Turn the Humidistat toward DRYEST for

normal operation.

The Humidistat can be set anywhere

between OFF and DRYEST. If you need more
dehumidification, turn the Humidistat toward

DRYEST. If you need less dehumidification,

turn the Humidistat toward OFF.

3. Stop the unit manually by turning Humidistat

right to OFF.

NOTE: The dehumidifier will run continuously
when the control is set to DRYEST.

Advertising