Power and sound controls, Power, Volume – Panasonic CQ-DP745 Manuel d'utilisation

Page 7: Attenuator, Tone enhancement

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

Power and Sound Controls

Power

If the car is not already running, turn the key in the ignition until the

accessory indicator lights.

Press PWR to switch on the power.

Volume

Press “VOL

a

.” or “VOLv” to increase or decrease volume.

U D L

30

Volume Level

Oto 40

Press “VOL^” or “VOL^” for more than a half second to change

numeric levels on the display rapidly.

Attenuator

• Press ATT. Volume will decrease to about 1/10 of its previous level.
• Press ATT again to deactivate when listening at normal volume.

Tone Enhancement

<For CQ-DP745EUC>
Press and hold LOUD (ATT) for more than 2 seconds to enhance
bass and treble tones when listening at low or medium volume. Press

and hold LOUD (ATT) for more than 2 seconds again to deactivate.

<For CQ-DP730EUC>

Press LOUD O) to enhance bass and treble tones when listening at

low or medium volume. Press LOUD (H) again to deactivate.

Note: This unit is equipped with an anti-volume-blast circuit which serves as an automatic volume

level adjuster so that you will not be deafened sudden loud volume.

This system operates as follows. When PWR is switched on, the volume level is low. After that, the
volume level gradually returns to its previous level prior to switching off the unit.

CQ-DP745/730EUC

Advertising
Ce manuel est liée aux produits suivants: