Panasonic DVD-PV40 - Manuel (Page 40)

Troubleshooting Guide
Problem Solution
No operation with
remote control. Check the battery is inserted correctly. ®
Replace the battery if it is drained, (£)
Aim the remote control at the remote control signal sensor. <0
The audio soundtrack
or subtitle language
cannot be changed.
Languages can only be selected if they are recorded on the
DVD.
Some DVDs require you to change the languages through
menus.
Subtitles not shown. Subtitles appear only if they are recorded on the DVD.
Turn the subtitles on, ©
Subtitles may fail to appear around the A and B points in A-
B repeat, and around the points you marked to play again.
Angles cannot be
changed. Angles can only be selected if they are recorded on the
DVD.
There may be parts of multi-angle DVDs where different
angles are not recorded.
You have forgotten
your ratings password. Do the following to reset the unit to its original factory
settings. While the unit is stopped, press and hold [11],
[ ] (backward), and [►, ON] on the main unit tor
about 3 seconds until the message “Initialized” dis­
appears from the screen, then turn the unit off.
You want to reset the
unit to the factory
settings.
There is a lot of noise.
Separate the unit from mobile phones if they are being used
close to each other.
Distorted sound. V.S.S. may cause distortion with some discs. Turn V.S.S.
off if this occurs. ©
No sound from the
unit’s speakers.
The speakers are off if the LCD is closed or headphones
are connected.
1 DVD-LV60 Turn up the volume.
No sound from other
speakers.
Check all connections and settings.
Check input mode of the other equipment. © - ©
Some parts of the
soundtrack are
missing. Turn V.S.S. off if you have connected this unit to other
equipment with audio cables and are using 3 or more
speakers. ©
RQT5931