Panasonic DVD-PV40 - Manuel (Page 20)

Enjoying Virtual Surround
Sound (V.S.S.)i
Remote control only
(Dolby Digital, 2-channel or over only)
Use V.S.S. to enjoy a surround-like ellect
if you are using 2 front speakers. If you are
playing a disc with surround effects
recorded on it, the effect is broadened and
sound seems to come from virtual speak­
ers on either side.
Press [V.S.S.] to select the V.S.S.
level.
The level is shown on the unit’s display.
Each time you press the button:
1 (Natural effect)
t
2 (Emphasized
effect)
OFF (Cancel)^
(Factory preset)
To get the most from V.S.S.
This figure shows DVD-LV60.
Changing the monitor settings
While stopped or playing
Press [MONITOR] to change the
monitor settings.
Each time you press the button:
B Changing the size of the picture
•MOHITOR-
ruoOE '
■ ^ i ■ “
B Adjusting the brightness
•MONITOR ■
' BRT ■
i
H Adjusting color intensity
►You can also use the On-Screen Menu
icons to perform this operation.
•V.S.S. will not work, or will have less
effect, with some discs, even if you
select “V.S.S. 1” or “V.S.S. 2".
• V.S.S. may cause distortion with some
discs. Turn V.S.S. off if this occurs.
-MONITOR'
I
-The setting mode is cleared.
Select the indicator for the setting you
want to change then follow the procedures
on page 21.
Turn the indicator off after you complete
the setting.
• Picture size returns to “1 (Norma!)” if the
unit is turned off or [IN/OUTj (^ page 37)
is pressed.
• Brightness and color intensity settings
are saved even if the unit is turned off
unless the settings were made while the
“LINE-IN" mode is on.
These changes are effective only for this
unit's LCD.
Make changes to the television’s settings
if you have connected one.
flOT5931