Panasonic CQ-R825 - Manuel (Page 29)

Specifications
GENERAL
Power Supply 12 V DC (11 V -16 V) Test Voltage 14.4 V, Negative ground
Maximum Power Output 35 W
X
4 channels at 400 Hz, Volume Control maximum
Tone Action Bass ; ± 12 dB at 100 Hz
Treble: ± 12 dB at 10 kHz
Current Consumption Less than 2 A (tape mode, 0.5 W 4-speaker)
Speaker Impedance 4 Q (4 - 8 Q acceptable)
Dimensions (W x H x D) T
X
1-15/16"
X
5-7/8" (178 x 50
x
150 mm)
Weight 3 lbs. 8 oz. (1.6 kg)
AM RADIO
Frequency Range 530- 1,710 kHz
Useable Sensitivity 28 dB/pV (25 \N( S/N 20 dB)
FM STEREO RADIO
Frequency Range 87.9- 107.9 MHz
Useable Sensitivity 13.2 dBf. (1.25 pV/75 Q)
50 dB Quieting Sensitivity 15.2 dBf. (1.6 pV/ 75 Q)
Frequency Response 30-15,000 Hz ±3 dB
Capture Ratio 1.5 dB
Alternate Channel Selectivity 75 dB
Stereo Separation 35 dB at1,000Hz
Image Response Ratio 65 dB
IF Response Ratio 100 dB
Signal/Noise Ratio 70 dB
TAPE PLAYER
Reproduction System 4-track, 2-program stereo
Tape Speed 1-7/8"/sec (4.76 cm/sec)
FF/REW Time Less than 110 sec (C-60)
Frequency Response 35 -14,000 Hz ±3 dB (normal)
35-17,000 Hz±3dB (metal)
Wow and Flutter 0.12 % (WRMS)
Signal/Noise Ratio 52 dB (Dolby NR on; 62 dB) (CQ-R825)
52 dB (CQ-R805)
‘Above specifications comply with EIA standards.
Note:
Specifications and design are subject to modification without notice due to improvements in technology.
Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol □□ are trademarks of Dolby Laboratories Licensing Corporation.
I
CQ-R825/R805EUC
29