Tps operation (tape program search), 1 ►g, Notes on cassette tapes – Panasonic CQ-R825 Manuel d'utilisation

Page 14: Cdsscttg tdpc pldyor 03sics, Continued

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

CdSSCttG TdpC Pldyor 03SICS

continued

or

TPS Operation (Tape Program

Search)

0 Press 3 (TPS) to activate the tape program search mode.

@ From the current selection, decide which program you want to select.

Now, press several times forward (up to 9 programs) or press

several times backward (up to 8 ) to select the corresponding

program number.

(Fast forward:)

1......................►g

t______ *

(Rewind:)

0............... ►S

t______ 4

EXI.To select the current program again

press 3 (TPS), and press “-♦4’ once.

EX2. To select the 1 st program backward

of the current selection, press 3

(TPS)

once,

and

press

two

times.

EX3. To select the next program, press 3

(TPS) and press

once.

EX4. To select the 3rd program fonward of

the current selection, press 3 (TPS)

once, and press

three times.

(D To turn it off, press 3 (TPS) again.

Note:

The TPS mode may not work correctly in the following cases. This, however, does not mean that the unit

is defective.

• There is an interval less than 4 seconds or having a high level of noise or hum between programs.
• There is particularly low-level passage during the program.

Notes on Cassette Tapes

Tape Slack:

Use a pencil or similar object to take up the slack as
shown. If a loose tape is used, this may result in the
tape becoming tangled in the rotating parts of the

unit.

CQ-R825/R805EUC

Advertising
Ce manuel est liée aux produits suivants: