Audio volume control, Standby function – Panasonic WV-CM1420 Manuel d'utilisation

Page 10

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

Audio Volume Control

The audio volume can,be adjusted with 0 or 0 button in normal view.
While the volume is being adjusted, the indicator displays the changed level as shown below.

B: Decreases the audio volume.
0: Increases audio volume.

AUDIO

Standby Function

1. Power up the monitor and select the input to be displayed.

Refer to Power Up above.

2. Pressing the STANDBY button will toggle the display mode in the sequence shown below.

Normal Display— STANDBY/MODE1 — STANDBY/MODE2

[1

n

The Power Indicator changes to orange in the standby mode, and the display shown below will appear on the monitor

screen.

MODE 1: Pictures are displayed with less brightness.
MODE 2: Monitor blackout, i.e., no picture is displayed.

Notes:

• Speaker (audio) output is disabled in the standby mode.
• The Standby mode can be controlled by the input from the STANDBY ON/OFF terminal on the rear of the monitor.

The input signal will toggle the mode selected in the Display Setting menu on and off.
To set up this function, refer to STANDBY ON in the Display Setting menu.

To Reset to the Factory Default Settings

If you are not sure about the settings you made and want to return to the factory default settings, follow the procedure shown
below.

1. Turn off the monitor with the POWER button.

2. Turn on the monitor with the POWER button while holding down the MENU and 0 buttons.

All settings in the Display Setting are reset to the factory default settings.

10

Advertising