Panasonic WV-PS15 - Manuel (Page 3)

ÉiliSiE
The Panasonic WV-PS15 Caméra Drive Unit drives VP (Video and Power) multiplex camera.
This simple system is designed to meet the surveillance and security needs of offices, factories, public
and residential buildings, etc.
IMIRËS
VP multiplex camera of the specified model
can be driven by WV-PS15.
• Controls camera setup through the specified
outboard device connected.
A single coaxial cable connects camera of
the specified model and camera input to the
Camera Drive Unit,
It supplies DC power, controls data and verti­
cal drive pulses to the camera, and receives
video and audio (*) signals from the camera.
VD/SYNC IN and OUT connectors provided
for synchronizing in parallel connection.
(*) If an applicable camera is connected.
ilfïi©ftTO0NS
Refer all work related to the installation of
this product to qualified service personnel
or system installers.
Do not block the ventilation opening or
slots on the cover.
To prevent the appliance temperature from
rising, place the appliance at least 5 cm (2
inches) away from the wall.
Do not drop metallic parts through slots.
This could permanently damage the
appliance. Turn the power off immediately
and refer servicing to qualified service
personnel.
Do not attempt to disassemble the
appliance.
To prevent electric shock, do not remove
screws or covers.
There are no user-serviceable parts inside.
Refer maintenance to qualified service per­
sonnel.
Handle the appliance with care.
Do not strike or shake, as this may damage
the appliance.
• Do not expose the appliance to water or
moisture, nor try to operate it in wet areas.
Do take immediate action if the appliance
becomes wet. Turn the power off and refer
servicing to qualified service personnel.
Moisture can damage the appliance and also
cause electric shock.
« Do not use strong or abrasive detergents
when cleaning the appliance body.
Use a dry cloth to clean the appliance when
it is dirty.
When the dirt is hard to remove, use a mild
detergent and wipe gently.
• Do not operate the appliance beyond its
specified temperature, humidity or power
source ratings.
Do not use the appliance in an extreme envi­
ronment where high temperature or high
humidity exists.
Use the appliance at temperatures within
-10°C - +50°C (14°F - 122°F) and a humidity
below 90 %.
The input power source for this appliance is
120 VAC 60 Hz.