Panasonic WV-CS554 Manuel d'utilisation

Page 6

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

4. Do not use strong or abrasive detergents

when cleaning the camera body.

Use a dry cloth to clean the camera when it

is dirty.

When the dirt is hard to remove, use a mild

detergent and wipe gently. Care should be

taken not to scratch the dome when wiping

it.

Afterwards, wipe off the remained part of the

detergent in it with a dry cloth.

5. Never face the camera towards the sun.

Do not aim the camera at bright objects.

Whether the camera is in use or not, never

aim it at the sun or other extremely bright

objects. Otherwise, blooming or smear may

be caused.

6. Never face the camera towards a place

exposed to light sources for a long time.

If light sources such as spot light cause

burn-in on the display screen, part of image

may discolor due to deterioration of color fil­

ter in CCD when changing aim of the cam­

era etc.

7. Do not install this camera upside down.

This camera is designed for mounting on the

ceiling or wall. Using this camera installed

upside down, for example, mounted on the

floor, may cause malfunction.

8. If “OVER HEAT” sign appears on the

monitor screen.

The temperature inside the camera exceeds

the normal level because of a malfunction of

the cooling fan etc. Turn the power off imme­

diately and refer servicing to qualified ser­

vice personnel.

9. Do not operate the camera beyond the

specified temperature, humidity or power

source ratings.

Do not use the camera in an extreme envi­

ronment where high temperature or high

humidity exists. Do not place near heat

sources such as radiators, stoves or other

units that produce heat.

Use the camera under conditions where

temperature is between -10'C - -i-50‘’C {14°F

- 122T) [Recommended temperature: -

h

40°C

(104‘F)], and humidity is below 90%. The

input power source is AC 24 V.

10. Do not install the camera near the air out­

let of an air conditioner.

The lens may become cloudy due to con­

densation if the camera is used under the

following conditions.

• Rapid temperature fluctuations by

switching the air conditioner on and off.

• Rapid temperature fluctuations due to

frequent door opening and closing,

• Use in an environment where eyeglas­

ses become foggy.

• Use in a room filled with cigarette smoke

or dust.

If the lens becomes cloudy due to con­

densation, remove the dome cover and

wipe all moist surfaces with a soft cloth.

11. Consumables

Parts having contacts such as the lens-drive

motors, cooling fan motor and slip-rings built

inside the camera are subject to wear with

time. About replacement and maintenance

of such parts, please ask the nearest service

center.

12. Do not aim the camera at the same object

for a long time.

Burn-in of an image may be caused on the

fluorescent screen of CRT,

• Matsushita Electric Industrial Co., Ltd.

Herewith declares that it will not be liable for

any damage, whether direct or indirect,

caused by using for business transaction or

security, or malfunctioning of this product.

CAUTION

To prevent fire or electric shock hazard, use a

UL listed cable, VW-1, style 1015, AWG 18 or

UL listed power supply cord, type SJT should

be used for the cable for the 24 V AC input

terminals.

Advertising
Ce manuel est liée aux produits suivants: