Panasonic WV-CS554 - Manuel (Page 53)

Note: When powered up, the unit performs a self-check (including one panning, tilting, zooming and
focusing operation).
• 24 V AC Power Supply Connection
„ ... . w Prepare the individual conductors for clamping.
^ ^ Use MOLEX band tool part number 57027-5000
(for UL-Style Cable UL1015) or 57026-5000 (for
UL-Style UL1007) for clamping the contacts.
After clamping the contacts, push them into the
proper holes in the accessory connector of this
camera until they snap in place.
Copper wire size
(AWG)
#24
(0,22mm=’}
#22
(0.33mm=')
#20
(0.52rrim*)
#18
(O.aSmmO
Length
of cable
(approx.)
(m) 20 30 45 75
(ft) 65 100 160 260
Accessory Connector Information
Pin no. Power source
1 24 V AC LIVE
2 24VACMEUTRAL
3 Ground
4 Not use
4 3
2 1
How to Assemble the Cable with the
Accessory Connector
Strip back the cable jacket approx. 3 mm (0.1
inch) and separate the individual conductors.
Approx.
3
mm (0.1 inch)
Up A ^
Contact
Î
Wire
^ Insert
------ rr/b—J1 Insert the wire until A position
——t clamp the contacts.
Up
Î
Wire
inrrC
Contact
^ CAUTIONS
Shrinking the cable-entry seal is a one­
time procedure. Do not shrink the cable-
entry seal until it has been ascertained
that the unit is functioning.
CONNECT THIS TO 24 V AC CLASS 2
POWER SUPPLY ONLY,
To prevent fire or electric shock hazard,
use a UL listed cable (VW-1, style 1007)
should be used for the cable for the 24 V
AC Input Terminals.
53