Panasonic WV-CS554 - Manuel (Page 32)

Press the CAM (SET) key.
ON; The camera sends an alarm output signal via the coaxial cable after it turns to a preset position.
OFF: The camera does not send the output signal.
Notes:
The camera ignores alarm inputs during manual operation.
Select OFF when the camera downloads or uploads the preset data.
• Password Lock (PASSWORD LOCK)
Caution: For security, do not operate your VCR for recording while the
password menus are displayed on the monitor,
A 3-digit number is used for a password to limit access to the privacy
zone settings.
1. Move the cursor to PASS\A/ORD LOCK, then select ON or OFF by
moving the joystick to the right or left.
Note: ON or OFF can be changed only after going through the
password verification.
OFF: Access to the privacy zone settings is free. (ENB) follows
after ON or OFF of PRIVACY ZONE on the SPECIAL 1 menu.
ON: Access is limited by the verification menu. (DIS) follows ON
or OFF of PRIVACY ZONE on the SPECIAL 1 menu,
2. Press the CAM (SET) key.
Special 1 menu
*• SPECIAL 1 **
PRIVACY ZONE 07F(EHB)n
PROPO.P/T ON
AREA TITLE ON (USER)'*
PATROL STOP
ALARM IH/OtTT %
PASSWORD LOCK OH'*
CLEANING OFF
EL-ZOOH OH
PRESET ALH OFF
IMAGE HOLD
RET OFF
PASSWORD
*• PASSWORD? **
0 1 3 3 4 5 6 7 B 9
OK RESET
HEW PASSWORD
RET
PASSWORD VERIFICATION
3. The password verification menu appears.
3-1 Select a numeral for the first digit by moving the joystick to the right or left, then press the CAM
(SET) key. Though the entered password is not displayed, the up-arrow moves one character to
the right.
3-2 Repeat the above step for the 2nd and 3rd digits.
Default: 123,
3-3 The cursor moves to OK after all the three digits have been entered. Except for changing the
password to a new one, press the CAM (SET) key.
If the correct password is entered, the screen returns to SPECIAL 1. The ON or OFF set on the
SPECIAL 1 menu is as set in step 1,
If a wrong password is entered, the screen returns to the verification menu. Repeat steps 3-1 to
3-3 to verify the password.
3-4 To cancel a password incomplete or of a wrong number, move the cursor to RESET or OK, and
press the CAM (SET) key. The screen returns to the verification menu.
3-5 To return to the SPECIAL 1 menu without verifying the password, move the cursor to RET, then
press the CAM (SET) key.
NEW PASSWORD
NEW PASSWORD
4. To change the password in step 3-3 above, move the cursor from
OK to NEW PASSWORD, then press the CAM (SET) key. NEW
PASSWORD menu appears.
Notes:
• NEW PASSWORD menu is accessible only after the verifica­
tion has been completed.
HEW PASSWORD?
0 1 2 3 4 5 6 7 S 9
OK RESET
RET
32