Panasonic WV-CS554 - Manuel (Page 29)

To Quit Editing
• To return to the Area Title menu, move the cursor to RET, then
press the CAM (SET) key.
• To cancel one area title, move the cursor to RESET, in the AREA
TITLE menu, then press the CAM (SET) key.
• To return to,the SPECIAL 1 rrenu, move the cursor to RET, then
press the CAM (SET) key,
• To erase all the area titles, move the cursor to RESET, in the AREA
TITLE selection menu, then press the CAM (SET) key.
Notes:
• An area title is displayed under the camera ID if both of them
are set in the same position. If different, they are displayed in
the area title position.
• An area title appears while the camera direction deviates
within 45 degrees from the set position. If two or more area
numbers share a common subject in a scene, the title of the
largest number is displayed.
AREA TITLE menu
AR£A TITLE 1*
0123456769
ABCDEFGBtJKLH
MOPQRSTtJVWXYZ
♦-*/%$
SPACE
POSI RET RESET
Display Position setting menu
FLOOR 1
NORTH
• Patrol (PATROL)
A routine of manual operations can be stored for 30 seconds at maxi­
mum and reproduced repetitively.
PATROL
1. For PATROL LEARN, set the following parameters for the starting
position. These parameters are stored when PATROL LEARN
mode starts.
• PAN/TILT/ZOOM/FOCUS settings
• IRIS setting
• SHUTTER setting
• AGC setting
• SENS UP setting
• WHITE BAUNCE setting
• IMAGE HOLD setting
• AREA TITLE setting
• DIGITAL FLIP setting
• PRIVACY ZONE setting
• CAMERA ID setting
• PROPO. pt setting
• PAN LIMIT setting
• BURSTsetting
• CLEANING setting
After starting LEARN, the following manual operations are stored.
• PAN/TILT/ZOOM/FOCUS operation
• IRIS operation
• Preset position movement
SPECIAL 1 menu
•* SPECIAL 1 **
PRIVACY ZONE OFF(ENB)'»
PROPO.P/T ON
AREA TITLE OH ( USER)'«
PATROL PLAY,
ALARM IN/OUT n
PASSWORD LOCK OFF-»
CLEANING OFF
EL-ZOOH OH
PRESET AUl OFF
IMAGE HOLD OFF
RET
Setup menu
•* SET DP MENU *•
PRESET 1
HAP
HOME POSITION
OFF
SELF RETURN OFF
AUTO MODE OFF
AUTO PAH KEY AUTO PAM
LOCAL/REMOTE LOCAL
PATROL JSTOPJ
CLEANING OFF
CAMERA **
2. Open the SET UP menu and move the cursor to SPECIAL 1.
Select LEARN, PLAY or STOP for PATROL by moving the joystick to the right or left.
LEARN: A series of manual operations is stored,
PLAY; Stored operations are reproduced.
STOP: LEARN or PLAY is not activated.
29