Panasonic WV-CS554 Manuel d'utilisation

Page 26

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

2, Select a zone number by moving the joystick to the right or left,

then press the CAM (SET) key.

• A zone number followed by * (asterisk) indicates that the zone has

already been registered,

• When a zone number having no * is selected, the picture is

zoomed out fully.

• When a registered zone number is selected, the camera moves to

the preset position. Note that if you move any of PAN/TILT,

ZOOM/FOCUS or ZONE SCALE in that position, the registered

zone number having no * is canceled.

• Zone frame appears in the center of the screen if 3 or fewer mask

areas exist in that picture and if the zone number is not registered

yet.

• The privacy zone setting may appear on the monitor depending

on the direction of the camera.

• Privacy zone function will not work at start-up immediately after

turning power on.

3. To register a new zone

3-1 Move the cursor to PUSH SET on the PAN/TILT line, then

press the CAM (SET) key.

3-2 Move the joystick to adjust the pan and tilt position so that the

desired position comes into the zone frame.

Note: Zone setting is not available while the zone frame disap­

pears, for example the camera directs further downward from
the 45° position.

ZONE setting menu

•• ZOHE NUMBER 1*У8 **

PAN/TILT

-»PUSH SET

ZOOM/FOCUS -»PUSH SET

ZOHE SCALE
SET DEL
RET

ZONE setting menu

** ZONE NUMBER 3*/8 **
PAN/TILT

;-»PUSH SET,

ZOOM/FOCUS

-»PUSH SET

ZONE SCALE
SET DEL

RET

PAN/TILT setting menu

** ZONE NUMBER 3*/8 **

;PAH/TILTi

-»PUSH SET

ZOOM/FOCUS

-»PUSH SET

U TILT b/L PAN R

ZOHE SCALE
SET DEL

RET

3-3 Move the cursor to PUSH SET on the ZOOM/FOCUS, then

press the CAM (SET) key.

ZOOM/FOCUS setting menu

•• ZONE NUMBER '3*./8 **
PAN/TILT

^PUSH SET

IZOOM/FOCUS

^PUSH SET

U ZOOM D/L.FOCUS R

ZONE SCALE
SET DEL

RET

3-4 Adjust zoom and focus, then press the CAM (SET) key.

Zoom can be adjusted within the range of 1 to 10 magnifica­

tions,

3-5 Move the cursor to ZONE SCALE, and move the joystick to

the right or left to adjust the zone frame. Press the CAM (SET)

key after the adjustment.

Moving the joystick in the L direction decreases the zone

frame, and moving it in the H direction increases it. However,

the aspect ratio is fixed at 3 to 4.

The privacy zone setting has been completed.

The menu returns to the ZONE NUMBER setting menu. If DEL

is selected, zone setting is released and the ZONE NUMBER

setting menu appears.

ZONE SCALE setting menu

** ZONE HUMBER 3*/8

* #

PAN/TILT

^PUSH

SET

ZOOM/FOCUS

-»PUSH

SET

ZONE SCALE
SET DEL
RET

L

H

26

Advertising
Ce manuel est liée aux produits suivants: