Panasonic WV-CS554 - Manuel (Page 25)

DIGITAL FLIP ON/OFF mi>
Move the cursor to DIGITAL FLIP and select ON or OFF by mov­
ing the joystick to the right or left,
OFF: Tilt range is limited from 0° to 90“.
ON: The digital flip function allows the tilt angle to widen up to
180°. The image on the monitor screen is flipped horizontally
and vertically at the tilt angle of approx. 135°. (If the camera
is installed on a ceiling).
Note: Tilt range narrows from 180° to 90° if PAN LIMIT is set to
ON.
Setup menu
** SET UP ИЕШ1 *•
PRESET 1 '*
MAP "1
HOME POSITION
OFF
SELF RETURN OFF
AUTO NODE OFF
AUTO PAN KEY AUTO PAN
DIGITAL FLIP ON
LOCAL/REMOTE LOCAL
SPECIAL! ‘1
CAMERA
R34eS SET UP ’«
Notes:
• Digital flip functions while moving the joystick downwards. In case
of moving the joystick to other directions, it does not function.
• When OFF is selected for DIGITAL FLIP, the following operations
are required to move the camera 180° vertically.
1) Move the joystick downwards and the camera will aim below.
2) Move the joystick to the right or left and the camera will rotate
180° horizontally.
3) Move the joystick upwards.
• To set preset position directly from the WV-CU360 controller, it is
momentary required setting the electronic zoom function and digi­
tal flip function to OFF.
Tilt range setting is disabled between 90° and 180°.
LOCAL/REMOTE Setting
Move the cursor to LOCAL/REMOTE, and move the joystick to the
right or left.
You can toggle between LOCAL and REMOTE.
Note; REMOTE does not work when the WV-RM70, WV-CU360,
WV-CU161, WJ-FS616, WJ-SX550B or WJ-SX850 is connect­
ed. Make sure that LOCAL is selected in this case.
■ SPECIAL 1
• Privacy Zone ON/OFF (PRIVACY ZONE) <Sg>
Up to 8 unwanted zones can be masked on the monitor screen.
1. Move the cursor to PRIVACY ZONE and then select ON (ENB) or
OFF (ENB) by moving the joystick to the right or left. Press the
CAM (SET) key to display the ZONE NUMBER selection menu.
ON (ENB): Preset privacy zones are veiled on the monitor screen.
OFF (ENB): Veil function does not work.
Note: If (DIS) follows, instead of (ENB), after ON or OFF, step 2
onward are not applicable. Select OFF for PASSWORD LOCK
to take the following steps.
Setup menu
** SET UP MEND **
PRESET 1 %
HAP ‘t
HOME POSITION
OFF
SELF RETURN OFF
AUTO HODS OFF
AUTO PAN KEY AUTO FAN
DIGITAL FLIP ON
LOCAL/REMOTE ЬОСАЬ'
SPECIAL! 't
CAMERA '«
RS485 SET UP “t
Special 1 menu
** SPECIAL 1 *•
PRIVACY ZONE
PROPO.P/T
ON
AREA TITLE ON (USER)’*
PATROL STOP
ALARM IN/OUT ■*
PASSWORD LOCK OFFt
CLEANING OFF
FL-ZOOH ON
PRESET ALM OFF
IMAGE HOLD
RET
OFF
ZONE NUMBER setting menu
25