Panasonic WV-CS554 - Manuel (Page 24)

6. To set endless turn ON/OFF
Move the cursor to ENDLESS, and move the joystick to the right or
left to set endless turn ON or OFF.
ON: The camera pans from the start position to the end position,
then keeps rotating in the same direction to return to the start
position. Set pan limit to OFF before endless turn is set to ON.
OFF: The camera pans from the start position to the end position,
then rotates backward to the start position.
This movement is repeated over and over.
7. To set a dwell time
Move the cursor to DWELL TIME and select a dwell time by mov­
ing the joystick to the right or left. Dwell time changes as follows:
I—► OS
L*30S-
- IS
■20S
2S •*—► 3S ^—I
-10S ^ — - 5 S — I
Notes:
• When the panning, tilting, zooming or focusing in SEQ, SORT
or PATROL (only for WV-CS854A) mode operation is con­
trolled manually, the Auto mode function should be canceled.
To activate Auto mode, select the desired AUTO MODE again
or set a time for SELF RETURN in the SET UP menu to resume
the AUTO MODE after the time set.
• When OS is selected, the camera stops without dwelling and
starts.
• Auto refreshing may be activated during PATROL PLAY or
AUTO MODE to calibrate the lens position.
•* AUTO PAN **
POSITIOH SET START
EHD
SPEED - ■ • ■ I -
L H
PAN LIMIT OFF
ENDLESS OH
DWELL TIME IS
RET
** AUTO PAN
POSITIOH SET START
END
SPEED ••••I*
L H
PAN LIMIT orr
ENDLESS
DWELL TIME OFF
'li
RET
AUTO PAN KEY Setting
This is to assign one of following auto function to the AUTO key on the
controller. Pressing the AUTO key activates the assigned function
after this setting. The menu screen follows the example for WV-
CS854A.
• Move the cursor to AUTO PAN KEY and select an auto function by
moving the joystick to the right or left.
Mode changes as follows:
SEQ SORT —
PATROL
AUTO PAN
.____ I
Setup menu
•• SET UP MENU **
PRESET 1 ‘t
HAP '«
HOME POSITION
OFF
SELF RETURN OFF
AUTO MODE OFF
AUTO PAH KEY AOTO_PAN
DIGITAL FLIP OH
LOCAL/REMOTE
SPECIALl 4
CAMERA '«
RS485 SET UP ~l
LOCAL
AUTO PAN: assigns auto panning function to the key.
SEQ: assigns SEQUENCE function to the key.
SORT: assigns SORT function to the key
PATROL: assigns PATROL PLAY function to the key.
Note: AUTO PAN LED on the controller does not light if someting
other than AUTO PAN is assigned. AUTO PAN does not stop
with the AUTO PAN key.
24