Panasonic WV-CS554 - Manuel (Page 16)

The following setting procedures are described on the assumption that this model is used in combination
with the WJ-SX550B Matrix Switcher and WV-CU550B System Controller. In case of using a controller
other than the WV-CU550B, refer to the table on page 10.
■ Menu Display
• Setup Menu Display
WV-CU550B
1. Select the number of the camera you want to set up and a monitor
to display the SET UP MENU.
2. Display the D4 menu on the LCD by pressing the appropriate cur­
sor buttons.
3. Press the FI button.
The SET UP MENU appears on the monitor.
4. To close the SET UP MENU, press the F4 button.
WV-CU360
Press the CAM SETUP key for 2 seconds or more to open the
SETUP menu.
WV-CU161
Press the CAMERA SETUP key for 2 seconds or more to open the
SETUP menu.
WV-RM70
1. Turn the MODE SELECTION switch to the NORMAL or ALARM
OFF position.
2. Press the PROG switch for 2 seconds or more to open the
Program menu.
3. Move the cursor to Camera Set Up, then press the SET switch to
open the SETUP menu.
D4 menu
Camera Set Up Menu
On Exi t
.......
iFl; F2 F3 F4
О Camera Set Up Menu
Res A.Res Exit
'■ tuTmiiiiiin
FI P2 F3 : fjí :
Setup menu
** SET DP ИЕШ ••
PRESET 1 Ч
MAP ■»
HOME POSITION OFF
SELF RETDRN OFP
AUTO КОСЕ OFF
AUTO PAN KEY AUTO PAH
DIGITAL FLIP OH
LOCAL/REHOTE LOCAL
SPECIALl
CAMERA
RS485 SET UP '«
Setup menu
** SET DP MEND **
PRESET 1 ■*
MAP ‘t
HOME POSITION
OFF
SELF RETURN OFF
ADTO MODE OFF
ЛОТО PAH KEY AUTO PAH
local / rehote LOCAL
PATROL STOP
CLEANING OFF
CAMERA '«
• Submenu Display
The items marked “* can be selected/changed on the submenu.
• Move the cursor to an item with the mark and press the CAM
(SET) key. The submenu is displayed.
Submenu
{for RS485 setup)
** RS485 SET UP •*
UNIT NUMBER in
SDB ADDRESS 1
BAUD RATE 19200
DATA BIT S
PARITY CHECK КОНЕ
STOP BIT 1
XON/XOFF HOT USE
WAIT TIME OFF
ALARM DATA AOT02
DELAY TIME
RET OFF
16