Panasonic WV-CS554 - Manuel (Page 13)

(7) Cleaning ON/OFF
This is for refreshing the electric-mechanical contacts built in the camera. Use this function for main­
tenance when the camera has been directed to a specific spot or panned over a specific range for a
long time.
(8) Electric Zoom ON/OFF
Up to 10-fold 2-fold) electrical zooming is available beside 22-fold optical zooming.
(9) Preset Alarm ON/OFF
Alarm signals are output in the following cases if ON is selected.
• Positioning is completed in SEQ mode,
• Positioning is completed in SORT mode.
• Positioning is completed at HOME position in SELF RETURN mode.
• Positioning is completed in command request.
• Positioning is completed in ALARM IN.
• Positioning to the start point is completed for AUTO PAN.
• Positioning to the start point is completed for PATROL PLAY.
(10) Image Hold ON/OFF (IMAGE HOLD ON/OFF)
The camera picture remains as a still image on the monitor until the camera reaches the preset posi­
tion. This function is useful for surveillance via local area network.
• Camera
(1) Camera Identification (CAMERA ID)
You can use the camera identification (CAMERA ID) to assign a name to the camera. The camera ID
consists of up to 16 alphanumeric characters. You can select whether to have the camera ID dis­
played on the monitor screen or not.
See page 35 for the setting.
(2) Light Controi (ALC/MANUAL)
You can select the mode for adjusting the lens iris.
The modes are as follows:
ALC: The lens iris is automatically adjusted according to the brightness of the object. You can select
one of two modes (SUPER-D2 ON or SUPER-D2 OFF).
MANUAL: The lens iris is fixed at the value that you have set regardless of the brightness of the
object.
• ALC Mode with SUPER-D2 ON
Super-Dynamic 2 Function {SUPER-D2)
The important object in a scene is usually placed in the center of the monitor’s screen. In SUPER-D2
mode, more photometric weight is given to the center of the screen (where the important object is
located) than to the edge of the picture (where a bright backlight would most likely be located).
You can use the SUPER-D2 function if you select ALC.
It eliminates interference by strong background lighting which makes the camera picture dark, such
as a spotlight.
See page 36 for the setting. •
• ALC Mode with SUPER-D2 OFF
In this mode, the picture is divided into 48 areas. If there is a source of brightness that interferes with
the clarity of the picture in these masks, corresponding areas mask the light to keep the clarity of the
picture.
13