0 auto iris lens connector, D flange-back adjusting ring, 0 camera mounting screw hole – Panasonic WV-BPR554 Manuel d'utilisation
Page 7: Down button (), Right button (), Q) left button (^), D up button (csi), Set button (el), Gen-lock termination switch (hi-z, g/l 75ii), Q) power indicator
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
0 Auto Iris Lens Connector
This connector is used to connect with the auto iris
lens by a 4'pin male connector that is supplied as
a standard accessory (Part No. YFE4191J100).
(D Flange-back Adjusting Ring
This ring is used to adjust the back focal length or
picture focus. Rotate this ring clockwise for a C-
mount lens or counterclockwise for a CS-mount
lens.
CD
Lens (Option)
0 Camera Mounting Screw Hole
This hole is used to mount the oamera onto a
mounting braoket.
® Down Button ()
This button is used to move the cursor downward.
It is also used to select items in the CAM SET UP
menu.
® Right Button ()
This button is used to move the oursor to the right.
It is also selects the mode and can be used to
adjust some levels.
Q)
Left Button (^)
This button is used to move the cursor to the left. It
also selects the mode and can be used to adjust
some levels.
(D Up Button (cSi)
This button is used to move the cursor upward. It
is also used to select items in the CAM SET UP
menu.
(|) Set Button (El)
This button is used to activate an item selected in
the CAM SET UP menu.
# Gen-lock Termination Switch (Hi-Z, G/L 75ii)
Set this switch to Hi-Z when a gen-lock video input
signal is looped through. In all other cases, set this
switch to 75 Q.
(Q) Power indicator
This indicator tights up when the power of this
camera is on.
Gen-iock Input Connector (GEN-LOCK)
This connector is used to oonnect an external sys
tem for synchronization.
-5-