Panasonic AG-TL500 - Manuel (Page 8)

Menu Screens
One of the menu screens appears on the TV monitor when the MENU/REC LOCK switch is set to MENU. The
display returns to the regular screen when this switch is set to OFF.
• When a menu screen has appeared, the items are set using the page, shift and set buttons.
• Advance through the pages ( page up ) of the menu screen using the page button.
• Move the items (downward or toward the right) using the shift button.
• Change the items (increment or decrement the values) using the set button.
(TIME ADJUSTi
1-01-96 MON
OtOOiOO
(REC LOCK)
MODE OFF
(HOUR METER)
OOOOOH
PI
(REC MODE)
REC T-MODE
TAPE IN
TAPE END
(VIDEO MODE)
MODE
DETAIL
P4
OFF
STOP
STOP
AUTO
ON
o
e
0
o
0
0
0
0
0
(DISPLAY) P2
POSITION L-UPPEH —
(REC INDICATE)
NOT REC CAMERA —
{BUZZER)
ALARM OFF —
TAPE END OFF —
TAPE REMAIN OFF —
ERR WARN OFF —
0
o
0
OFF -
30SEC
(ALARM)
MODE
DURATION
(RECALL) ■
(OUT PUT SELECT)
TERMINAL OUT ERR WARN
o
0
0
(INTERNAL TIMER EEC) P5
(TIMER)START END T-M —
SUN OFF
MON OFF
TUE OFF
WED OFF
THU OFF
FRI OFF
SAT OFF
DLY OFF
0
CAUTION:
The menu screens are not displayed while the unit is
playing back a tape.
MENU SCREEN 1
In addition to the date and time display and the recording mode lock setting which appear on the TV monitor,
the hour meter is displayed on Menu Screen 1.
O
Date setting (see page 10)
O
e Time setting (see page 10)
Recording mode lock
ON: LOCK on the front display tube lights up, and
all operations except for REC REVIEW are pro­
hibited while recording is in progress.
O
Hour meter (see page 20)
This indicates the unit’s total operation time (the
cumulative total for the cylinder rotation time).
MENU SCREEN 2
The time/date display position, monitor screen blue display and buzzer settings are performed on Menu Screen 2.
0 Display position selection
This selects the position where the date and time
are to be displayed on the TV monitor.
(L-UPPER -> R-UPPER ^ L-BOTTOM ^
R-BOTTOM -> CENTER OFF)
O Blue display
This sets a blue display on the monitor screen at all
times except while recording or playback is in
progress.
BLUE; The display on the monitor screen is blue at
all times except while recording or playback is in
progress.
CAMERA: The pictures from the video input
connector are shown on the monitor screen at all
times except while play-back is in progress.
O Setting of the buzzer sound
ALARM: The buzzer sounds once alarm recording is
performed.
TAPE END: When the tape end is reached in the
recording mode, the buzzer sounds while the tape is g
at the end.
TAPE REMAIN: The buzzer sounds when there is
only about 3% (with an NV-T120 tape) of the tape
remaining before the end is reached in the recording
mode.
ERR WARN: The buzzer sounds when the unti is set
to the warning status.
To release the buzzer:
ALARM: Release alarm recording.
TAPE END: Transfer the mode from the tape end or
press the STOP button.
TAPE REMAIN: Transfer the mode (but not to
PAUSE or REC REVIEW) from the recording mode
or press the REC button.
ERR WARN: Release the warning status.
When TAPE END and TAPE REMAIN have been
set to ON, END and REMAIN flash on the display
tube at the same time as the buzzer sounds.
They cease flashing when the buzzer is released.