Panasonic AG-TL500 - Manuel (Page 25)

Ail status request command
When the all status request command has been received, the
current deck status is detected and sent by the bitmap shown
below.
PC: [STX] QOS [ETX]
VTR: [STX] OPS [ETX]
Counter commands
Bit
00: CTL request
7 6
88: PG data save request
44: PG data request
CC: Counter display
5 4 3 2 1 0
REC PAL Tracking Tape speed Repeat Alarm
LOCK PAL H (+) 00 :2h REW IN
ON=1 =1 ON=1 10 :4h ON=1 Usually=0
Test mode
00: Normal
10: Line
01: Service
11: —
Reverse play —
Forward
direction=0
01 : 6h
— Cassette
IN
IN=1
Time setting command
This sets the minutes and seconds to zero.
PC: [STX] LTJ [ETX]
VTR: [STX] LTJ [ETX]
Automatic send setting command
This sets whether to detect changes in the deck status and
send the status automatically.
PC: [STX] OCS:METX]
VTR: [STX] OCS [ETX] *; N=Automatic send ON
F=Automatic send OFF
Automatic send setting request command
This Is for verifying the automatic send setting.
PC: [STX] QSC [ETX]
VTR: [STX] OCS* [ETX] •; N=Automatic send ON
F=Autonnatic send OFF
25