Panasonic AG-TL500 - Manuel (Page 18)

Alarm recording operation
O
Check that a video cassette with its tab intact has
been inserted.
O Set the MENU/REC LOCK switch to MENU to
display the menu screens. Press the page button
to display the alarm recording setting screen
(Menu Screen 3) on the TV monitor.
{ALARM) P3
MODE OFF
DURATION
(RECALL) -
30SEC
O
Press the shift ( V ) button to move the flashing to
DURATION.
Press the set (+ or -) button to set the recording
duration.
0 Upon completion of the settings, set the MENU/
REC LOCK switch to OFF. The regular screen is
restored.
0 Press the REC button.
If an alarm input signal is subsequently supplied,
the time mode set by T-MODE changes to 2H or
6H, and alarm recording continues until the alarm
is released.
e
Press the set (+ or -) button to display 2H or 6H for
MODE.
MODE 2H
If TAPE END on Menu Screen 4 has been set to REPEAT, the auto repeat recording mode is established when
the tape comes to the end.
With emergency recording, set the unit to the POWER OFF or STOP mode.
Alarm Recall
The time when the alarm signal was input can be ascertained on the TV monitor by checking the alarm input
time in the RECALL item on Menu Screen 3.
O Set the MENU/REC LOCK switch to MENU to
display the menu screens. Press the page button
to display the alarm recording setting screen (Menu
Screen 3) on the TV monitor.
(ALARM) P3
MODE 2H
DURATION 30SEC
(RECALL) 10-01-97 20:19
09-14-97 12:05
08-30-97 08:40
06-25-97 04 :14
0 Upon completion of the settings, set the MENU/
REC LOCK switch to OFF. The regular screen is
restored.
The alarm recall function stores up to 4 alarm input times in the memory and displays them on the screen. If
there have been more than 4 inputs, they wilt be deleted from the screen in sequence starting with the oldest
data.
When the RESET button is pressed while Menu Screen 3 is on the display, the alarm recall memory can be
cleared.
18