Panasonic CQ-VX777EUC - Manuel (Page 47)

□ Overview
This equipment should be installed by a profession­
al. However, if you plan to install this unit yourself,
your first step is to decide where to install it. The
instructions in these pages will guide you through
the remaining steps: (Please refer to “WARNING”
statement above).
• Identify and label the vehicle wires
• Connect the vehicle wires to the wires of the
power connector
• Install the unit in the dash
• Check the operation of the unit
□ Installation Hardware
Item Qty
Screw with washer (M5 x 8mm) 4
Flat-head small screw (M5 x 8mm) 8
Power Connector 1
Remote Control 1
Lithium Battery (CR2025) 1
If you do encounter problems, please consult your
nearest professional installer.
CAUTION: This unit will operate with a 12 volt DC
negative ground auto battery system only. Do not
attempt to use it in any other system. Doing so
could cause serious damage.
* •
Before you begin installation, look for the following
items included in the packing with your unit.
• Warranty Card...... Fill this out promptly
• MSC (in Canada: Panasonic) Servicenter
Directory.......Keep for future reference in case
the unit needs servicing
• Installation Hardware....... Needed for in-dash
installation
CQ-VX777EUC
47