Opening/closing the front panel h (liftup), Note – Panasonic CQ-VX777EUC Manuel d'utilisation

Page 19

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

Opening/Closing the Front Panel H

(Liftup)

Open and close the front panel when inserting or removing a

tape.

• When OPEN CLOSE is pressed, the front panel is lifted all the way

up.

If a tape is inside, it will be automatically ejected.

• When OPEN CLOSE is pressed again, the front panel is lowered all

the way down to the original position.

Note:

• After a tape is inserted when the front panel is up highest, the panel is automatically lowered all the

way down to the original position.

• When the front panel is up highest, all operation buttons will be disable except for OPEN CLOSE

and the remote control buttons.

• If no cassette tape is inserted or ejected for about 25 seconds while the front panel is up highest, the

panel is automatically lowered all the way down to the original position.

• If a CD or tape is not in the fully ejected position, loading or unloading will be accurately performed

because, otherwise, the CD, tape or the front panel could be damaged.

Note:

• The highest liftup position of the front panel can be set to either

of the two positions as shown at left.

• If there is no obstacle in the car, the front panel can be set to

position ©(FULLOPEN).

• The front panel is originally set to position (2) (HALF OPEN).
• See page 39 for how to set the front panel liftup position.

L

CQ-VX777EUC

19

Advertising