Repacking instructions, Please note, Materials required – Panasonic HIGH SPEED KV-S6045W Manuel d'utilisation
Page 44: Fix the optical unit of the flatbed, Pack the scanner
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Repacking Instructions
It is highly recommended that you keep the original carton and ALL packing materials. If you need to
transport or ship your scanner, please follow these instructions.
Please Note:
• Please use the original carton and all of the original packing materials. If you do not have the original
packing materials, these are available from your Panasonic dealer. Please refer to your service dealer, or call
1-800-833-9626 (U. S. A. only).
• Improper repacking of the scanner may result in a service charge to repair the unit.
• The scanner should be handled in the correct (horizontal) position.
Materials Required:
• Original Scanner Carton & Packing Materials
• Shipping Tape and Scissors
1
2
3
4
Disconnect your scanner from the electrical outlet and the interface cable.
Remove the SCSI interface board.
• Please refer to "Installation Instructions for the SCSI Interface Board and SIMM Module"
enclosed with the unit.
Fix the optical unit of the flatbed.
• Please refer to the installation manual enclosed with the unit.
• Turn the power on and complete intializing (return the optical unit to the original position),
then attach the metal clamp at position ®. (Refer to pages 2 and 3 on the installation manual.)
Pack the scanner.
Joint
Blower
Power cord
Hopper attachment
Operating instructions
Installation manual
Maintenance manual
44
• Warranty card
• Roller cleaning paper
(3 pieces)
SCSI interface board
Installation manual for
SCSI interface board
and software license
agreement, etc.
PiXView software
(3.5" FD 4 pieces)
ISIS driver software
(3.5" FD 1 piece)
TWAIN driver
software
(3.5" FD 1 piece)