Panasonic CCTV CAMERAS WV-BP132 - Manuel (Page 10)

C. WV-BP134 (24V AC 60 Hz)
Connect the power cable to the AC 24V IN termi­
nal on the rear panel oi the WV-BP134.
24V AC, 60 Hz
(19.5 V-28 V)
Video Cable
1. It is recommended to use a monitor whose resolu­
tion is at least equal to that of the camera.
2, Set the termination switch to the 75ii position on
the last monitor.
A. Use a 75i2 coaxial cable.
B, Set the termination switch to the 75fl position
on the last monitor and to the Hi-Z position on
the other monitors. Do not change the posi­
tions after setting.
Recommended wire gauge sizes for 24V AC line
Copper wire
size (AWG)
#24
{0.22mm')
#22
(0.33mm')
#20
(0.52mm')
#18
(0.83mm')
Length
of Cable
(Approx.) (m) 95 150 255 425
(ft) 314 495 842 1 403
Caution:
To prevent fire or electric shock hazard,
use a UL listed wire (VW-1, style 1007)
should be used for DC 12V or AC 24V
Input Terminals.
Monitor
@ © y
Monitor
VIDEO —
© © B
C, The maximum extensible coaxial cable length
between the camera and the monitor is shown
below.
-
8
-