Panasonic Hi-Fi Professional/Industrial Video DS850 - Manuel (Page 23)

Setting the video switches
1 3
Setting the DNR (digitai noise reducer) switches
■ When playing back a tape with a reduced signal-to-noise ratio, these switches can be used to reduce the noise
level as warranted by the picture quality. (However, a slight deterioration in the resolution will result.)
■ Keep this switch OFF during editing. The picture may be disturbed if a tape is repeatedly edited.
■ Bear in mind that when material is dubbed repeatedly in the DNR ON mode, after-imaging will be prevalent.
■ The degree of S/N ratio enhancement can be controlled by setting dial menu function item No. 2013 and 2014.
Setting the VIDEO LEVEL control
This is used to adjust the video level automatically during
recording.
PUSH: The video level is automatically adjusted.
PULL: The video level not automatically adjusted.
VIDEO
LEVEL
(0
O)
c
ts
a>
(/)
Setting the MEMORY switch
Set the CONTROL switch to “REMOTE." The switch then can be
used to select whether the unit functions as source or as an
editor, using the 34P controller.
PLAY: Unit functions as a player.
EDIT : Unit functions as an editor.
• Keep the switch at PLAY when the unit is to be used on its
own.
MEMORY CONTROL
23