1 power on your computer, 2 open the disc tray, 3 place a disc – Panasonic DVD-ROM CF-VDD283 Manuel d'utilisation
Page 7: Removing a diso, 4 close the disc tray
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Advertising
Setting a Disc
1
Power on your computer
2
Open the disc tray
Press the eject button and slowly pull out the tray.
3
Place a disc
Place the disc with the label facing upward in the
drive and push down until the center holder clicks.
<Removing a diso
Place a finger on the center holder and lift up on the
edge of the disc,
4
Close the disc tray
Close the tray without touching the eject button.
Label side up
^
note
>
If the vibration of the DVD-ROM drive is excessively high, use the Setup Utility to
reduce the CD-ROM or DVD-ROM drive speed by setting it to [Low], (This setting
does not work for the DVD-ROM disc.)
Advertising