Group multi sequence, Multi group setting, Notes – Panasonic WJ-HD500 Manuel d'utilisation

Page 76: Quad setting

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

• Group Multi Sequence

The assigned group camera images can be displayed in
succession on the monitor screen for the specified dura­
tion.

Each sequence step can be displayed as either four screen

segments (quad) or a minimum quantity of the segment

screen, depending on the setting.
Refer to GROUP SEQ MODE in the 5 - 1 SEQUENCE
SETUP for further details.

3. During the sequence, press the SEQUENCE button to

pause the sequence that is being run on the monitor
screen.

The indicator in the button blinks to indicate that the

sequence is paused.

SEQUiEI^CE

/ I \

1. Select one of the group displays by pressing the

GROUP SELECT button.

Pressing this button toggles the group display on the

monitor as shown below.

Press the SEQUENCE button to restart the sequence

forward from the step that was previously paused by

pressing the SEQUENCE button.

The indicator in the button changes to a steady light.

GROUP

SELECT

1

2

6

9 15

G1: Group 1
G2: Group 2
G3: Group 3
G4: Group 4

none: All Inputs

5. To return to Spot monitoring, select an assigned cam­

era image by pressing one of the numeric buttons that
the indicator in the button lights up.

If you attempt to press any button other than the one

assigned to the group, it will be ignored.

2. Press the SEQUENCE button to run a sequence on the

monitor screen starting from group 1.

The display pattern varies according to the group

assignment and setting, shown below is an example of
monitor displays.

If the cameras are assigned to the group as follows:

Group 1

Cameras 1, 2, 6, 9, 15

Group 2

Cameras 3, 4, 5

Group 3

Cameras 7, 8, 10, 11

Group 4

Cameras 12, 13, 14,16

<MULTI GROUP setting>

7

8

10

11

12

13

14

16

Notes:

• You can also enable the Auto Skip function to skip

any steps when no video signal is present.
{or a screen segment is blacked out on the multi­

screen display.)
Refer to the AUTO SKIP in the 5 - 1 SEQUENCE
SETUP for further details.

• The setting can be adjusted in such a way that the

sequence step for displaying an image on the Spot
Monitor screen in the single spot mode can be
skipped automatically.
(or - on a multi-screen display - the screen segment

is blacked out.)
Refer to the SECRET VIEW in the 5 MULTIPLEXER

SETUP for further details.

<QUAD setting>

о

Ш

12

13

14

16

7

8

10

11

77

Advertising