Panasonic WJ-HD500 - Manuel (Page 44)

■ Alarm Recording (Manual Recording)
These items let you set the recording mode in Time Lapse
Recording when an alarm is activated during manual
recording.
1. Move the cursor to the ALARM REC MODE parameter
by pressing the A or T button, then select a recording
time mode by pressing the [+) or Q button.
The parameters are the same as MANUAL REC MODE.
The factory default setting is SF-24H.
2. Move the cursor to the REC RATE parameter by press­
ing the A or T button, then select a recording rate by
pressing the
E
or □ button.
For details refer to REC RATE in this menu.
3. Move the cursor to the REC QUALITY parameter by
pressing the A or ▼ button, then select a recording
image quality by pressing the (+] or Q button.
For details refer to REC QUALITY in this menu.
4. Move the cursor to the DURATION parameter by press­
ing the A or ▼ button, then select an alarm recording
duration by pressing the 0 or Q button.
OFF: Disables alarm recording.
10S - 6M: Enables alarm recording for between 10 sec­
onds and 6 minutes.
MANUAL: Enables alarm recording while the alarm sig­
nal is received from the ALARM port.
CONTINUE: Enables alarm recording until the REC
STOP is pressed.
The factory default setting is 10S.
5. Move the cursor to the DYNAMIC REC parameter by
pressing the A or ▼ button, then select an alarm
recording pattern by pressing the 0 or Q button.
OFF: Records all input images starting from input 1.
ALM-PRI: Records the alarmed input images preferen­
tially over other video inputs,
ALM'ONLY: Records the particular images that have
activated the alarm.
The factory default setting is OFF,
45