Panasonic WJ-HD500 - Manuel (Page 43)

Manual Recording Setup
The Disk Recorder can be recorded the images in Time
Lapse recording when the REC button is pressed manually.
Manual Recording is disabled when the TIMER in the setup
menu is set to something other than OFF,
These settings are also valid for External Timer Recording
when the TIMER in the setup menu is set to EXT.
These items let you determine the image quality and active
mode for manual recording,
1, Move the cursor to MANUAL in the WJ-HD500 SETUP
menu by pressing the A or T button.
2, Pressing the 0 or Q button will toggle the display on
the cursor as shown below.
c
MANUAL WITH AUDIO ^ MANUAL WITHOUT AUDIO T
3. Pressing the SET button will call up the MANUAL REC
SETUP menu according to the specified audio function,
as shown below.
^ . . . .
--
'
2 HMinU, REC SETUP (WITHOUT AUDIO)
MANUAL REC MODE SP-
2*n
REC RATE 7.5PPS
REC QUALITY SUPER FINE
AliARH REC MODE SF- 24H
REC RATE 7.5FPS
REC QUALITY SUPER FINE
DURATION lOS
DYNAMIC REC OFF
4. To return to the previous WJ-HD500 SETUP menu,
press the SETUP/ESC button.
■ Manual Recording Mode Setting
1. Move the cursor to the MANUAL REC MODE parameter
in the MANUAL REC SETUP menu by pressing the A or
T button.
2. Select the recording time mode to be set by pressing
the 0 or Q button.
SF-*^H or Selects the recording time
mode in enhanced fine quality.
FQ-**H or FQ-A*if!*H: Selects the recording time
mode in fine quality.
NQ-**H or NQ-A*#^H: Selects the recording time
mode in normal quality.
EX-^i^H or EX-A**^H: Selects the recording time
mode in extended quality.
SP or SP-A*: Freely selectable
indicates the hours for recording time mode:
2, 12, 18, 24, 48, 72 , 96, 120, 180, 240, 360, 480,
720, 960, 1200, 1440, 2160, 2880, 3600, 4320,
6480, 8640
(parameter A* indicates recording with audio)
When the parameter SF/FQ/NQ/EX is selected for
recording time, the recording rate and quality are auto­
matically set according to the selected recording time.
Note: It may not be possible to set the recording time,
depending on the remaining storage capacity of the
hard disk.
The factory default setting is SF-24H.
3, If the parameter SP is selected for recording time, move
the cursor to the REC RATE parameter by pressing the
A or T button, then select a recording rate by pressing
the 0 or 0 button,
1 - 30FPS: Records the selected number of freeze
images every second,
0.5FPS: Records a freeze image every 2 seconds.
0.4FPS: Records a freeze image every 2.5 seconds.
0.3FPS: Records a freeze image every 3.3 seconds.
0.2FPS: Records a freeze image every 5 seconds,
0.1 FPS: Records a freeze image every 10 seconds.
Notes:
• 30FPS is the active selection when the
FIELD/FRAME parameter in the COMMON REC
SETUP menu is set to FIELD.
• 15FPS is the active selection when the
FIELD/FRAME parameter in the COMMON REC
SETUP menu is set to FIELD or FRAME 3DIM OFF.
Move the cursor to the REC QUALITY parameter by
pressing the
A or ▼ button, then select a recording
image quality by pressing the 0 or 0 button.
SUPER FINE: For enhanced sharpness (Compression.
Rate 1/6)
FINE: For fine image quality (Compression Rate 1/10)
NORMAL: For normal image quality (Compression Rate
1/16)
EXTENDED: For extended time recording quality
(Compression Rate 1/25)
The factory default setting is SUPER FINE.
44