Secure the mounting collar 0, Secure the rear of the unit, Using the rear support strap (5) – Panasonic Removable Full Front High-Power CD Player/Receiver with Changer Control CQ-DPX95EUC Manuel d'utilisation
Page 28: Using the rubber cushion (optional), Installation guide, Continued □installation procedures
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Installation Guide
continued
□Installation Procedures
1.
Secure the Mounting Collar
0.
Insert Mounting Collar © into the car’s dashboard, and bend mounting tabs out with a screwdriver.
Screwdriver
2.
Secure the rear of the unit.
a) Check the electrical connection by referring to this operating instructions.
b) Connect the Mounting Bolt ®, using a suitable wrench.
c) Insert the unit into Mounting Collar ® and push it in until “click" is heard.
Lock Lever
Make sure that the
lock lever is flush
with the mounting
collar (not projecting
outward).
d) Secure the rear of the unit to the car by either of the two recommended methods.
■ Using the Rear Support Strap
(5)
Affix one end of the Rear Support Strap ® to the rear of the unit, and the other end to the Fire Walt
of Car, or some other metallic area.
■ Using the Rubber Cushion (Optional)
(If there is an existing Rear Support Bracket on the Fire Wall of Car.)
Cover Mounting Bolt ® on the rear of the unit with Rubber Cushion (Optional), and mount it into
the existing Rear Support Bracket.
Plain Washer
Fire Wall of Car
28
Rear Support Bracket
(existing on the car)