Panasonic CQ-MRX777EUC Manuel d'utilisation
Page 51
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Advertising
3. Insert the Trim plate ®.
4. After installation reconnect the
negative (-) battery terminal.
To Remove the Unit
a) Remove the removable face plate. (See page 50.)
b) Remove the Trim Plate
CD
with a screwdriver as shown in the figure.
c) Pull out the unit while pushing two lock levers using a screwdriver.
d) Remove the unit pulling with both hands.
Fig.1
Lock Lever
Screwdriver
49
Advertising