Secure the mounting collar 0, Secure the rear of the unit, Installation guide – Panasonic CQ-MRX777EUC Manuel d'utilisation
Page 50: Installation procedures
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Installation Guide
(Continued)
Installation Procedures
Note: Disconnect the cable from the negative (-) battery terminal.
1. Secure the Mounting Collar 0.
Insert Mounting Collar © into the dashboard, and bend mounting tabs outward with a screwdriver.
Screwdriver
2. Secure the rear of the unit.
a) Check the electrical connection by referring to these operating instructions.
b) Connect the Mounting Bolt using a suitable wrench.
c) Insert Power Connector (D to the unit.
'' Lock Lever
Make sure that the
lock lever is flush
with the mounting
collar (not projecting
outward).
e) Secure the rear of the unit to the car by either of the two recommended methods.
■ Using the Rear Support Strap
(D
Affix one end of the Rear Support Strap © to the rear of the unit, and the other end to the Fire
Wall of Car, or some other metallic area.
■ Using the Rubber Cushion (Optional)
(If there is an existing Rear Support Bracket on the Fire Wall of Car.)
Cover Mounting Bolt ® on the rear of the unit with Rubber Cushion, and mount it into the existing
Rear Support Bracket.
Fire Wall of Car
Rear Support Bracket
48
CQ-MRX777EUC