Setting thru output, Note, Selecting a thru output setting item – Panasonic CQ-MRX777EUC Manuel d'utilisation
Page 37
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
(D Press TRACK^^ to change the frequency as follows.
(Default: FREQ. OFF)
OFF
L
100Hz
150Hz
200Hz
(TRACK'*^: opposite direction)
Press > or < when using a remote control.
The Hz indicator lights when setting.
Note: In case of using the cutoff frequency or phase difference adjustment function of an external
amplifier (available as an option), set the cutoff frequency of this CD/MD receiver to OFF and its delay
time to 0 ms.
Setting THRU Output
The THRU indicator blinks during adjustment, and lights steadily when THRU output is set.
Note:
• THRU output is stereo and changes as the volume balance of the built-in amplifier is adjusted. (See
Fader, page 28.)
• In THRU output mode, POSITION and SBC/SBC-SW effects are invalid.
Selecting a THRU Output Setting
Item
© Press and hold SPC(SUB-W) for more than 2 seconds to change
to PREOUT THRU mode.
® Press VOL A to display “PREOUT THRU”.
Press A when using a remote control.
© Press SPC(SUB-W) to switch as follows.
LEVEL SELECT : Volume level adjustment
F/R SELECT
Fader interlocked
Note:
When a setting mode is selected but no operation is made within
5 seconds, the display will return to the regular operation mode.
CQ-MRX777EUC
35