Setting a sbc-sw type – Panasonic CQ-MRX777EUC Manuel d'utilisation
Page 33
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Setting a SBC-SW Type
Using Rear Speaker Exclusive to Subwoofer Output
The rear speaker (built-in amplifier) can be used as a subwoofer by
setting its cutoff frequency.
(In this case, the rear speakers will be in monaural mode.)
© Press SEL to select SBC mode.
© When “SBC-SW” is not displayed, press
VOLV
to change to
SBC-SW.
Press V when using a remote control. ‘
© Press TRACK^^ to change to the SBC-SW cut off frequency as
follows.
(Default: SBC-SW OFF)
SBC-SW OFF
SBC-SW 200 Hz
SBC-SW 100 Hz
i
SBC-SW 150 Hz
(TRACK"*<: opposite direction)
■t- Press > or when using a remote control.
SBC-SW OFF: Set to this position when conventional speakers
are connected.
The tone is regular type, with no cutting off high
frequency.
CQ-MRX777EUC
31