Inputting a still picture into the memory, 1 push the [digital mode select] switch downwards, Press the [wipe] button – Panasonic AG-456UP Manuel d'utilisation

Page 117: Starting to record a scene with the still picture, 3 press the [start] button, Press the start/stop button, Press the [start] button again, Enregistrement en mémoire d’une image fixe, D. appuyer sur la touche [wipe, Pour commencer une prise de vues avec l’image fixe

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

DIGITAL MODE

SELECT

r--------------------

>

D.WIPE

^___________

)

1

3 . 5

2

ENGLISH

FRANÇAIS

Inserting a Still Picture with a Wipe

Effect

(Digital Wipe)

■ Inputting a Still Picture Into the Memory

When the Movie Camera is in the recording pause mode:

1

Push the [DIGITAL MODE SELECT] Switch

downwards.

^ Press the [WIPE] Button.

• Press this button while aiming the Movie Camera at the

scene to be used for the still picture.

•The image in the Viewfinder stands still for approx.

2 seconds and this still picture is input into memory.

■ Starting to Record a Scene with the Still Picture

In the recording pause mode:

3

Press the [START] Button.

•The still picture from the memory replaces the moving

picture gradually, starling from the left side.

•The Movie Camera should be aimed at the scene, which is

to be shot following the recording of the still picture.

4

5

Press the Start/Stop Button.

•The still picture from the memory is now being recorded.

Press the [START] Button again.

•The moving picture again replaces the still picture gradually,

starting from the right side, and the recording of the moving

picture continues.

■ Canceling the Digital Wipe Function

Slide the Digital Mode Selector Switch up.

Insertion d'une image fixe avec
effet de balayage au montage

(balayage numérique)

■ Enregistrement en mémoire d’une image fixe

Placer le camescope en mode pause à l'enregistrement:

1

Pousser le sélecteur [DIGITAL MODE

SELECT] vers le bas.

d. Appuyer sur la touche [WIPE].

•Appuyer sur cette touche pendant que le camescope est

pointé sur le sujet devant servir pour l’enregistrement de

l’image fixe.

• L'image dans le viseur demeure fixe pendant environ

2 secondes puis est enregistrée en mémoire.

■ Pour commencer une prise de vues avec

l’image fixe

Placer le camescope en mode pause à l’enregistrement:

O Appuyer sur la touche [START].

L’image fixe en mémoire remplace graduellement l’image

dans le viseur, en partant de la gauche de l'écran.

• Le camescope doit être pointé sur le sujet devant être

enregistré après l’image fixe.

4

Appuyer sur la touche de mise en marche/

arrêt.

• L'image fixe en mémoire est alors enregistrée.

5

Appuyer de nouveau sur la touche [START],

•L’image réelle remplace graduellement l'image fixe, à partir

de la droite de l’écran, et la prise de vues se poursuit.

■ Pour annuler la fonction de balayage numérique

Faire glisser le sélecteur de mode numérique vers te haut.

(■fS)

Advertising