Preparatory steps, Speaker settings, In distance – Panasonic SC-HT280 Manuel d'utilisation

Page 16: 1 press [power, ¿a, 2 press [a] and [b] at the same time, 3 press [a] to select “distance, 4 © press [b] to select the speaker, Channel to be set, Turn [sfc mode] to set the distance, 5 press [a] and [b] at the same time

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

RQT5307

A SPEAKERS B

A SPEAKERS B

©

A SPEAKERS B

I

/_ /

I

/ n //

//

I f / i \n

7

n f (_ !

/_//! // /

// /

i II n \n r

/

I \ I I I \ l I

SFC MODE

(Oi

f i f

'

/ / /

I I I I

Preparatory steps

Speaker settings

These settings should be done to get the most from the unit’s

reproduction modes pages 18-19).

Front, center, and surround channel settings

Set the DISTANCE for your speakers.

In DISTANCE

Enter the distance of each speaker from the listening position so

the sound from the speakers reaches the listening position at the
same time. The unit calculates the delay time for the center and
surround speakers based on these distances.

1

Press [POWER, ¿A].

2

Press [A] and [B] at the same time.

“SETTING” appears on the display.

3

Press [A] to select “DISTANCE”.

Each time the button is pressed the display switches as

follows.

SIZE —► DISTANCE —- FILTER —► DR COMP

i______________________________________ I

4

© Press [B] to select the speaker

channel to be set.

Each time the button is pressed the display switches as

follows.
FRONT------ ►CENTER----- ► SURROUND

i__________________________I

@ Turn [SFC MODE] to set the

distance.

Distance can be set at 1 foot intervals between 3 feet

to 30 feet.

The factory settings are as follows.

Front and center speakers:

10 FEET

Surround speakers:

5 FEET

@ Repeat steps ® and @ to complete

the distance settings for the front,
center and surround speakers.

5

Press [A] and [B] at the same time.

“COMPLETE” appears on the display.

If you allow about 10 seconds to elapse between settings, the
procedure is cancelled, all settings are returned to how they were,
and the previous display is restored. Begin again if this occurs.

For your reference:

The settings remain as they are until changed by the above

procedure, even after the power has been turned off.

Other settings are necessary if you replace the
speakers pages 38-39).

Advertising
Ce manuel est liée aux produits suivants: