Panasonic CQ-DFX88EUC - Manuel (Page 7)

Power and Sound Controls
Power
Turn the key in the ignition until the accessory indicator lights.
Press [SOURCE](PWR) to switch on the power.
Press and hold [SOURCE](PWR) again for more than 1 second to
switch off the power.
When the power is turned off while the time is displayed, the clock
mode remains on. When [DISP] is pressed, the system is turned
off completely.
Note:
When the power is switched on for the first time, a demonstration
appears on the display. To cancel this display, press [DISP].
When a
CD is inserted with all the power connections performed,
the unit power will be automatically turned on, CD loading begins
and the CD is played.
Volume
• Press [/\ VOL] or [v VOL] to increase or decrease the volume.
Volume Level (0 to 40)
• Press [/\ VOL] or [v VOL] for more than 0.5 seconds to
change the numeric level in sequence.
Mute
• Press [•](MUTE)to mute the sound completely. When MUTE
is on, “MUTE” indicator will light, and “MUTE” will blink on the
display.
\ I /
i\/i I i T c: __
^ I
• Press [•](MUTE) again to cancel.
Note: This unit is equipped with an anti-volume-blast circuit which serves as an automatic vol­
ume level adjuster so that you will not be deafened by sudden loud volume level.
This system operates as follows. When [SOURCE]{PWR) is first pressed to switch the unit on,
the volume level Is low. After that, the volume level will gradually return to the same level as the
one before the power was turned off last time. The anti-volume-blast circuit will not work when
the volume level is set lower than position 20 on the display.
CQ-DFX99/DF88EUC